Description
Model | 241A1M |
Blows per Minute | 1,590 |
Piston Stroke in. (mm) | 4" (102) |
Weight w/o Accessory lb (kg) | 26.88 (12.2) |
Length w/o Accessory in. (mm) | 52.75" (1370) |
Bore in. (mm) | 1-5/16" (33) |
Butt Diameter in. (mm) | 3" (76) |
Air Inlet in. (NPT) | 1/4" |
Minimum Hose Size in (mm) | 3/8" |
Air Consumption @ Load cfm (L/min) | 29 (821) |
- Time tested valve design
- Front end seal excludes dirt and grit
- Round piston rod
- 3"(76mm) butt included
- Optional front end butts available
This Ingersoll Rand air tamper features a long handle, heavier stroke, two times the weight, and double the BPM of the bench model. This unit is easily held from a standing position while compacting very large molds at floor level. Contact us with any questions about this pneumatic sand rammer.
Ingersoll Rand Construction Tools Catalog PDF
CCN Number 1137298