Description
With its 6" extended anvil, quick setup, and no hoses to trip over, the heavy-duty W9691 1” cordless impact wrench promotes better safety and efficiency. Ingersoll Rand innovation ensures balanced weight, ergonomic D-handle with 360-degree auxiliary handle, and protected IQV20 battery configuration with power for a full day’s work.
The W9691-K4E Kit shown here also includes 4 Batteries and a Dual Bay Charger capable of charging two batteries at the same time!
Power
With the Ingersoll Rand 1” cordless impact wrench, you will always have up to 3,000 ft-lbs ready to power and under control.
- Up to 3,000 ft-lbs of Nut Busting Torque and 2,200 ft-lbs of tightening torque
- Four power control modes with two featuring automatic shut-off (at 180 & 400 ft-lbs of fastening torque)
- Integrated Power Control System includes two modes which will stop the tool in SNUG or MID-POWER close the set values listed above
Productivity
Reduce setup time up to 15% compared to air tool setups, to get more jobs done in a day. Improve productivity and comfort for your operators with no air hose to carry and plug.
- 4 power control modes with 2 featuring automatic shut-off at approx. 180 & 400 ft-lbs
- High torque impact wrench battery leverages existing IQV20 battery platform with enough power for a full day of work
- Provides superior ergonomics - Both batteries are nestled into the frame of the tool making it less cumbersome to handle
Durability
- IP56-rated for use in tough environmental conditions such as fleet truck maintenance, oil & gas, power generation, and rail industries. That means this battery-powered impact wrench is protected from dust and particles in the air as well as powerful jets of water. That means this battery-powered impact wrench is protected from dust and particles in the air as well as powerful jets of water
- Impact- and chemical-resistant composite housing stands up to almost all fluids found in maintenance shops or on job sites
Capacity
- Up to 250 bolts per charge - Sufficient capacity to tackle all the nuts and bolts in a full day’s work
- Lowers overall cost of ownership by leveraging your existing battery stock - The W9491 & W9691 uses the same 20V lithium-ion battery used across Ingersoll Rand’s entire line of IQV20 cordless tools
Specifications
| Drive Size | 1" |
| Voltage | 2 x 20V |
| Fasteners Per Charge | 250 |
| Nut Busting Torque (Ft-lbs) | 2600 |
| Nut Busting Torque (Nm) | 3525 |
| Full Forward Torque (Ft-lbs) | 2200 |
| Full Forward Torque (Nm) | 2982 |
| RPM | 890 |
| Length | 20.1" |
| Width | 6.9" |
Ingersoll Rand W9691 Cordless 1" Impact Wrench Product Documents (PDF Format)
| |||
 |  |  |  |
